Marathon MAGNUM ROUTER Návod k obsluze stáhnout pdf (Strana 42)

* Replace primary air cleaner when dust valve restriction indicator gauge shows a vacuum of 25 in. H

** Change the oil and oil filter after the first 100 hours, then every 500 hours. If not using John Deere Plus 50 II

engine oil, the interval must be decreased to every 250 hours.

RESETTING THE MAINTENANCE ALARMS

The Power Zone™ controller will display a warning message when the unit is due for maintenance or service. The

maintenance or service intervals are set at 250, 500, and 3000 hours of engine running time. Once the unit has been

serviced, the appropriate maintenance alarm reminder needs to be reset. The following procedure demonstrates

how to reset the maintenance alarms:

1. With the unit shut down, move the Control Power switch to the ON (I) position. After initialization, the controller

will toggle automatically to the Home screen.

2. Press ▲, ►, ▼, or ◄ to enter the maintenance screens.

3. Press  and O simultaneously. The next screen will display the Configuration menu.

4. Press  to move the cursor (blue highlighted text) down to the Maintenance group.

5. Press ► to access the sections. Press  to highlight the Maintenance section.

6. Press ► to access the parameters and highlight the maintenance alarm that needs to be reset.

7. Press  to select the editable parameters. The cursor will highlight “Not Reset” under the selected maintenance

alarm. Press  to highlight “Reset”.

8. Press  to reset the selected maintenance alarm.

Note: If the selected maintenance alarm does not need to be reset, press  to highlight “Not Reset” and press 

to return to the parameters section.

1. To perform additional maintenance alarm resets, repeat steps 6-8.

2. To save changes, press and hold  for five seconds. To discard changes made, press and hold O for

five seconds.

Replace Fuel Filter Elements 

Check Engine Mounts 

Check Air Intake Hoses, Connections, and System 

Check Engine Electrical Ground Connection 

Check Automatic Belt Tensioner and Belt Wear 

Check Cooling System 

Lubricate Leveling Jack(s) 

Check Generator Drive Plate Torque (refer to page 43) 

Test Thermostats 

Replace Air Cleaner Elements 

Replace Alternator and Fan Belts 

Check Fuses 

Add Coolant 

Check Electrical Wiring and Connections 

Item Daily

250

Hrs.

500

Hrs./12

Months

3000

Hrs./ 36

Months

Required

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 59 60

Komentáře k této Příručce

Žádné komentáře

Marathon MAGNUM ROUTER Návod k obsluze Strana 42

Komentáře k této Příručce